[phpBB Debug] PHP Warning: in file [ROOT]/phpbb/session.php on line 580: sizeof(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/phpbb/session.php on line 636: sizeof(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4511: Cannot modify header information - headers already sent by (output started at [ROOT]/includes/functions.php:3257)
[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4511: Cannot modify header information - headers already sent by (output started at [ROOT]/includes/functions.php:3257)
[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4511: Cannot modify header information - headers already sent by (output started at [ROOT]/includes/functions.php:3257)
14 Forums • Pre-war lapstrake I-14 centerboard design
Page 1 of 1

Pre-war lapstrake I-14 centerboard design

Posted: Mon Jan 23, 2017 6:11 pm
by WHIRLY
Gentlemen,
I only got the hull to WHIRLY, and after careful measuring of the inside of the centerboard trunk and the position of the slot for the centerboard pin, I come up with the following shape for a centerboard. The notch in the forward bottom is the only way I can see that allows the "plate" to go vertical. I could remove wood so the edge would go straight aft and not completely fill the bottom of the trunk. Seems like an odd shape. Moving the pin slot would have solved everything. Also, the top trunk slot seems about 7-1/2" farther aft than necessary to allow the arm on the centerboard to stop it at a vertical down position. Am I missing something here? Was the trunk not laid out correctly? What do you think?
Thanks for your help. - Mark